Façade Restoration and Remediation

Restore.
Don’t replace.

Purpose‑made products and expert advice for commercial buildings worth hundreds of millions of dollars.

Aluminium panel façade before restoration — dull, stained panelsBefore
The same aluminium panel façade after restoration — bright, even panelsAfter
pH 6.7Neutral formulation
Non‑abrasiveSafe on finished surfaces
Non‑toxicLittle to no disruption
Non‑DGShipped non‑dangerous goods

Commercial buildings

Built for buildings worth hundreds of millions.

We specialise in supplying products and advice for commercial buildings valued into the hundreds of millions of dollars. Our products are made specifically for commercial building surfaces — because an asset at this scale deserves nothing less.

Products

Purpose‑made for commercial surfaces.

Not general cleaners. Formulations developed specifically for anodised and PVDF aluminium, glass and composite panel façades.

Advice

Expertise before anything touches the wall.

We assess substrate, finish, environment and maintenance history, then specify the right product and method for your building.

Assurance

Protecting high‑value assets.

When a façade is worth millions, the wrong product is a costly mistake. We take that risk off the table for owners, managers and contractors.

Would you clean a $100 million car with generic cleaning products?

Your building deserves the same care.

Before. After.

See the difference.

Cost‑effective solutions using restoration alternatives to expensive façade and surface replacement.

Office tower façade before restoration — dull, streaked aluminium panelsBefore
Same office tower façade after restoration — bright, even aluminium panelsAfter

Commercial office tower — aluminium façade restored in place, no panels replaced.

Up close. Drag to compare.

Curved aluminium façade before restoration Curved aluminium façade after restoration
BeforeAfter

Curved aluminium façade — restored in place.

Composite panel streaking before restoration Composite panels after restoration
BeforeAfter

Alucobond composite panels — streaking removed.

Surfaces

Made for the modern façade.

Products and processes designed specifically for each surface — never one‑size‑fits‑all.

Anodised Aluminium

Restore the original lustre without stripping the anodic layer.

PVDF Aluminium

Lift chalking and pollutants from coated finishes, gently.

Glass

Clear staining and mineral build‑up from glazing.

Composite Panels

Alucobond and similar ACP systems, edge to edge.

Glass Restoration

Half done.
Fully obvious.

Mineral staining and pollutant build‑up turn a glass façade grey. Restoration brings back the clarity and reflection it was designed to have.

Glass curtain wall photographed mid‑restoration — stained glass on the left, restored reflective glass on the right Mid Restoration

Glass restoration — captured mid‑restoration.

Clarity restored.

Staining and mineral build‑up lifted from the glazing.

Frames included.

Mullions and transoms brought back with the glass.

Building stays open.

Non‑toxic, non‑abrasive — work continues around occupants.

Panel Edge Restoration

It starts at the edge.

Façade degradation begins at the panel edge, as pollutants build up in the silicone. Left there, they compromise the integrity of the rubber and the panel — until replacement becomes the only option.

Panel Restora is the only solution that restores both the panels and the silicone, for maximum longevity after the work is done.

Leaders in Panel Edge Restoration
Restored panel section and joints beside an untreated section
Restored strip across a streaked aluminium panel joint
Restored white panel and edge next to glazing
Restored section on a window frame mullion

The case for restoration

Better for budgets.
Better for buildings.

Savings

A fraction of the price.

Restoration can deliver huge savings compared with replacing exterior building materials.

Greener

Keep it on the wall.

Restoring building materials instead of replacing them is a much greener option.

Value

Like new again.

Increase the value of your asset with a building that looks brand new.

Why Panel Restora

Assurance, built in.

Buildings are high‑value assets. We remove the risk of undertaking a restoration project by using products made specifically for each surface.

Restored façade against blue sky

Every detail evaluated.

Substrates, finishing, environment and historic maintenance — assessed up front to secure the best result, every time.

6.7 pHNeutral chemistry, kind to finishes and seals.
0Abrasives. Nothing that scratches or dulls.
Non‑toxicWork proceeds safely around occupants.
Non‑DGShipped as non‑dangerous goods.

Restoring versus Replacing

Two paths. One clear choice.

Restore with Panel Restora
Replace
Cost
A fraction of the price
Full material and installation cost
Disruption
Little to none
Highly disruptive
Environment
Materials stay in service
Panels to landfill, new embodied carbon
Panel edges & silicone
Restored together
Removed and re‑sealed
Asset value
Brand‑new appearance
Brand‑new appearance

One panel

One panel.
All the proof.

A single restored panel, sitting between its untreated neighbours. Same building, same weather, same age — the only difference is restoration.

Imagine the whole façade.

One restored façade panel between two weathered, untreated panels

How we work

Simple. Local. Sustainable.

Consult

We assess your building’s substrates, finishes, environment and maintenance history.

Supply

We provide products and solutions designed specifically for modern building surfaces.

Partner

Wherever possible we work with local contractors who already know your building — the most competitive path to sustainable restoration.

Panel Restora — Façade Restoration and Remediation

Bring your building back.

Tell us about your façade and we’ll recommend the right restoration approach.

[email protected]